Multisites Deployment

Unanswered Question
Mar 22nd, 2010
User Badges:

Hi there,


I'm implementing a UC520 system for three branches, in my scenario I have three UC520 system in each branch and the three branches and connected Via VPN tunnel created in a 2800 series router in each site (SO from each site I can ping and access any device at the other sites). I need now to connect the voice between the branches so I want to clear some points before starting the configuration:


  • Since the VPN sonfigurtion is done on the router not on the UC520 then can I use the Mulisite manager or not ?  and if not then will I be able to use the features on the Uc520 such as (Call admision control, traffic shaping, number of calles).
  • what is the best configuration or solution to make this three site comunicate together as a voice.
  • is there any document to explain this ?
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Maulik Shah Wed, 03/24/2010 - 17:39
User Badges:
  • Silver, 250 points or more

Multisite manager would not work for this case to configure the UC500. You can follow the multi site guidelines for CLI here

https://supportforums.cisco.com/docs/DOC-9652 (may have to modify this to ignore the VPN configs)


Another good doc on integrating multiple CME / UC500 systems is below:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/multcme.html

Actions

This Discussion