Hi All,
We have 1841 IOSFW (WAN Router) which is connected to Provider Internet Router.
Yesterday I have upgraded the IOS from Old 12.4(11) to New 12.4(19).
I checked the CPU & Memory usage for last one week and it is normal (memory used up to 30 Mbytes).
Today I just cleared the NAT translations "clear ip nat tra fo" after that router got hang and rebooted itself.
We found in flash that crash dump has been created. Please find the below #sh flash & #sh ver details:
2#sh flash:
13 23431096 Mar 22 2010 17:51:06 +00:00 c1841-advipservicesk9-mz.124-19.bin
14 193696 Mar 23 2010 08:56:18 +00:00 crashinfo_20100323-085619
#sh ver
Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(19), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 29-Feb-08 18:45 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
DKIGNFW02 uptime is 16 minutes
System returned to ROM by error - a Software forced crash, PC 0x60504CE8 at 08:56:19 UTC Tue Mar 23 2010
System restarted at 08:58:19 UTC Tue Mar 23 2010
System image file is "flash:c1841-advipservicesk9-mz.124-19.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
export@cisco.com. 1841 (revision 6.0) with 233472K/28672K bytes of memory.
Processor board ID FCZ1037221F
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
If
Cisco
Configuration register is 0x2102
Did anyone experienced this kind of issue or can someone tell me why it happend like this and what steps need to take care to not repeat in future.
Regards,
Naidu.
