03-23-2010 02:38 AM - edited 03-19-2019 12:40 AM
Hi,
I have a server MCS 7825-I4 for install a CUMA 7.x and the dvd of CUMA
I power on my server and it start the boot process from DVD, I select the English Language and US.
The drivers controllers start to load when suddenly the system show me that it can't find the controler device to load and the system leave me to select one from a list If I select CD-ROM. But it appear this option:
- CD-ROM
- Hard Drive
- NFS
- HTTP
- FTP
I have the following deplyment:
- A cluster of CUCM 7.1 (2 serves, publisher and subscriber)
- One Cisco Unity Connection 7.1
- One Cisco Unified Presence Server 7.x
It not necessary the installation of ASA because I am goint to integrate with Blackberry Enterprise Server.
I attach a screenshot when the problem, I think so, it can be for the filesystem.
Can somebody help me?
Many thanks.
Solved! Go to Solution.
03-23-2010 05:30 AM
If you're using CUMA 7.1.3.10000-11, this is expected. The DVD was not able to detect 7825-I4. Get the latest version 7.1.3.10101-3 from your reseller or Cisco.
Michael
03-23-2010 05:30 AM
If you're using CUMA 7.1.3.10000-11, this is expected. The DVD was not able to detect 7825-I4. Get the latest version 7.1.3.10101-3 from your reseller or Cisco.
Michael
03-23-2010 08:42 AM
Hi,
Now I'm download the version that you recomend to me.
I will answer you when I will install the CUMA and all it's going fine.
Thanks.
09-28-2010 09:56 AM
Hi,
Same issue facing during installation CUMA 7.x.
Could you please suggest me that from where I can download bootable load of suggested version or we have order again to cisco.
Thanks
09-29-2010 12:11 AM
Hi,
If you download the version which I downloaded you haven't problems with the installation.
Today my sever is in production and never I have problems.
A greeting.
09-29-2010 12:49 AM
Hi,
Can you please share me the download link for the same.
Because I have already downloaded following from cisco site, but these are not bootable load.
7.1.3.10000-11
7.1.3.10101-3
Thanks
09-29-2010 02:01 AM
Hi,
You can download this version for MCS 7825-I4 which I used for my project.
Cisco Unified Mobility Advantage 7.1.3-10101-3.
09-29-2010 02:15 AM
Hi,
Thank you very much for your prompt response, But this is the the non bootable load which can upgrade existing installed vesion.
While i require bootable load for new installation.
Thanks
09-29-2010 02:56 AM
Sorry for the answer before.
I don't find the version bootable which you need in the cisco web page.
My installation was with this version I didn't any upgrade.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide