DiD/DoD in SIP Trunk

Unanswered Question
Mar 23rd, 2010
User Badges:

Dear All


We have a voice gateway  connected via 1 E1 (TDM) with the 20 channel DoD and 10 DiD. We will replace it with SIP triunk (IP based Network) and the customer require the same configuration (20DoD+10 DiD) Is it possible to do that with SIP Trunk.


Best Regards,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Brandon Buffin Tue, 03/23/2010 - 07:19
User Badges:
  • Purple, 4500 points or more

Yes, SIP supports DID. As far as DOD, I assume you want certain phones to call out with particular outbound caller ID. If so, yes this is possible. One way to do this is with voice translation rules to modify the caller ID based on the calling DN.


http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml


Hope this helps.


Brandon

Actions

This Discussion