DMA ExportDatabase Error

Jose Rodrigo Lopez Calderon · ‎03-23-2010

Hi:

Im planning to upgrade CUCM from 4.1.3(sr6) to 7.0.2 and I ran the DMA form CUCM 4.1.3 but the Export is failed, I saw the "DMAErrors" Log and it show me this:

********************************************************************************
*
*          The following section displays errors found during
*          CallManager database export.
*
*          Date/Time : 03-23-10/10:12:33 AM
*
********************************************************************************
ExportDatabase, returning [Failure, Inaccessible or Incompatible Database Version]
********************************************************************************
*
*          End of errors found during CallManager database export.
*          CallManager database export.
*
*          Date/Time : 03-23-10/10:12:44 AM
*
********************************************************************************

I realy dont know why tell me that the Database is Incompatible, attach the Exportdb.log. In this log shows a DATABASE=PRE_SEADRAGON but this is not the name of the Database.

Rob Huffman · ‎03-23-2010

Hi there,

It sure sounds like this bug;

CSCsz63731 Bug Details

DBConnection0 Database=PRE_SEADRAGON on DMA Export Fail

Symptom:

Replication failure in 4.x after DMA failed export. DBConnection0 Database value in registry under HKLM/Software/Cisco Systems. Inc/DBL is set to PRE_SEADRAGON.

Conditions:

This can occur if DMA export fails on early migration step.

Workaround:
Modify the registry key HKLM/Software/Cisco Systems Inc./DBL DBConnection0 Database= value to the correct CCM03X Database instead of PRE_SEADRAGON.

Status
Fixed

Severity
2 - severe

Last Modified
In Last Year

Product
Cisco Unified Communications Manager (CallManager)

Technology

1st Found-In
7.0(2.10000.18)
7.1(2.10000.4)

Fixed-In
7.1(2.39000.46)
6.1(3.9901.183)
6.1(4.1000.10)
7.1(3.10000.11)

Hope this helps!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727