trunkgroup with fxo

Unanswered Question
Mar 23rd, 2010

I have the configuration listed, I would like to know why the 100% of the times the port 0/0/0 is selected? what is the functionality of the

hunt-scheme? , I tested round-robin, seq, etc.... with the same result, always take the port 0/0/0.

!
trunk group ALL_FXO
max-retry 5
hunt-scheme longest-idle
!
!
voice-port 0/0/0
trunk-group ALL_FXO 64
connection plar 8100
!
voice-port 0/0/1
trunk-group ALL_FXO 64
connection plar 8100
!
voice-port 0/0/2
trunk-group ALL_FXO 64
connection plar 8100
!
voice-port 0/0/3
trunk-group ALL_FXO 64
connection plar 8100
!
!
dial-peer voice 315 pots
corlist outgoing user-celular
destination-pattern 0033.........
trunkgroup ALL_FXO 64
prefix 3
!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vikramabrol Tue, 03/23/2010 - 21:33

Hello,

Your configuration should be if you set hunting to sequential.

trunk group TEST

hunt-scheme sequential

voice-port 0/0/0

trunk-group TEST 4

voice-port 0/0/1

trunk-group TEST 3

voice-port 0/0/2

trunk-group TEST 2

voice-port 0/0/3

trunk-group TEST 1

In above config scenario voice-port 0/0/3 will be chosen first but only if its free otherwise hunting will move to port 0/0/2 and so on till it find a free voice port.

I have voice port 0/0/0 tagged as 4 assuming you are getting inbound calls on first channel.

HTH

Actions

This Discussion