sh controller d0 | beg ---Clients output

Unanswered Question

Anyone know what the "Dec" column means in the "sh controller d0 | beg ---Clients" output below?

Asking because the two clients having issues on this AP have incrementing counts on this value.  I assume it has something to do with (de/en)cryption, as all other clients are on an unencrypted SSID.

Thanks for any feedback,

--Bruce Johnson

                      RxPkts KBytes Dup Dec Mic   TxPkts  KBytes  Retry RSSI SNR
0026.bbec.73d1      354     26  244   0   0      232     128    532   92  43
0015.70a4.3707      375     89    8 291   0       50      18      0   55  41
0015.70d3.5040     1291    313   43 1076   0      101      37      0   55  40
0025.0042.f115     4944    273 1305   0   0       81      14    324   84  12
001f.5bca.d40b    15974    640 6715   0   0       46       5    183   84  12
0026.bb04.4ee4    12861    867  205   0   0     3022     684   1625   78  20
001f.5bdc.1a01    21388    767 1302   0   0        6       1      9   76  23
001f.3b02.2891    11386    695  541   0   0     1493     620    223   71  25
0023.1219.5545    28703   4074    9   0   0    25935   26861   7384   72  24
0011.24c6.c421    11418   1649    0   0   0        7       1     10   78  19
f81e.dfe2.4161     6764    270  144   0   0       22       4      7   64  32
f81e.dfe2.4129    19812    864 1178   0   0        8       1      6   76  20
0015.70b0.974c      133      7    0   0   0       42       2      4   57  40
001f.e12b.8de6    88834   3407 3544   0   0       82      14     86   78  18
0016.cb00.f8c2    99865   6140 1741   0   0     6654    1119   7148   79  17

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

My guess is, based on the controllers client statistics screen, is that "Dec" means "Decrypt Failed."

-->
Client Statistics
Bytes Received
Bytes Sent
Packets Received
Packets Sent
Policy Errors
RSSI
SNR
Sample Time
Excessive Retries
Retries
Success Count
Fail Count
Tx Filtered
Data Retries
Rts Retries
Duplicates
Decrypt Failed
Mic Errors
Mic Missing Frames
Packets Received
Packets Sent
     
-->
Link Test Results
Client MAC Address
AP MAC Address
Packets Sent/Received by AP
Packets Received by AP
Packets Lost (Total/AP->Client/Client->AP)
Packets RTT (min/max/avg) (ms)
RSSI at AP (min/max/avg) (dBm)
RSSI at Client (min/max/avg) (dBm)
SNR at AP (min/max/avg) (dB)
SNR at Client (min/max/avg)(dB)
Transmit retries at AP (Total/Max)
Transmit retries at Client (Total/Max)
Packet rate
Sent count
Receive count
Packet rate(mcs)
Sent count
Receive count
Ping Test Results
Client MAC Address
Packets Length
Packets Sent
Packets Received
Local Signal Strength (dBm)
Local Signal to Noise Ratio (dB)
  Link test in progress .

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode