Problem with Nortel 4548 switch and a Cisco 2960

Unanswered Question

Hello,

We have a  problem that I can't figure out the cause. I am hoping anyone could  help.

We have a 4548 configured with 3 Vlans. Port 1 is connected  to a Cisco 2960, Port 24 is connect to a Nortel BCM phone system  (192.168.206.40, vlan206).

Within the 4548, we can ping any Vlan  across our entire network, same goes to the Cisco 2960.

However,  from our computer vlan (vlan6 192.168.6.3-192.168.6.253), we can ping  anything except 192.168.206.40 which is the BCM. We can ping all the  phones such as 192.168.206.101.

Attached are the conf file of the  nortel switch and the cisco switch.

Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 03/24/2010 - 10:46

[email protected]


Hello,

We have a  problem that I can't figure out the cause. I am hoping anyone could  help.

We have a 4548 configured with 3 Vlans. Port 1 is connected  to a Cisco 2960, Port 24 is connect to a Nortel BCM phone system  (192.168.206.40, vlan206).

Within the 4548, we can ping any Vlan  across our entire network, same goes to the Cisco 2960.

However,  from our computer vlan (vlan6 192.168.6.3-192.168.6.253), we can ping  anything except 192.168.206.40 which is the BCM. We can ping all the  phones such as 192.168.206.101.

Attached are the conf file of the  nortel switch and the cisco switch.

Thanks.

Can you confirm that there is not a firewall on the BCM phone server that is stopping incoming ICMP requests. What happens if you ping from the BCM system ?

Jon

Actions

This Discussion