03-25-2010 03:32 AM - edited 03-06-2019 10:18 AM
hi all,
i get, after i allready changed the power supply, the same error message again.
2010 Mar 24 20:03:53.271 L4DE8NSY523 %NOHMS-2-NOHMS_ENV_ERROR: Module 1 temperature sensor PS-1 failed.
2010 Mar 24 20:04:23.333 L4DE8NSY523 %NOHMS-2-NOHMS_ENV_ERROR: Recovered: Module 1 temperature sensor PS-1 failed.
2010 Mar 24 21:38:27.285 L4DE8NSY523 %NOHMS-2-NOHMS_DIAG_ERR_PS_FAIL: System minor alarm on power supply 1: failed
2010 Mar 24 21:38:57.299 L4DE8NSY523 %NOHMS-2-NOHMS_DIAG_ERR_PS_RECOVERED: Recovered: System minor alarm on power sup
ply 1: failed
i do not find the error explanation in the error message decoder. now i guess that not the power supply is defect but the NEXUS 5010 itself. am i right ? please advise !
Cisco Nexus Operating System (NX-OS) Software
kickstart: version 4.1(3)N1(1)
system: version 4.1(3)N1(1)
regards Reinhold.
05-20-2014 11:32 PM
that depends on what you see in "show env".
and how often you see the errors.
if ps shows " ok" in " show env". this is likely a cosmetic issue:
Please check CSCub52503 for more detail.
05-20-2014 11:36 PM
also see http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_4_0_1a_N1_1a/Nexus5000_Release_Notes_4_0_1a_N1_1a.html
for open caveat: CSCtb56755
it is also a cosmetic issue.
05-20-2014 11:53 PM
Hi mitang.
thanks for answer. fortunately it stopped.
regards Reinhold.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: