ACS 5.0 + AD+ ASA

Unanswered Question
Mar 25th, 2010
User Badges:

Hi Guys,

I am trying to setup authentication of VPN users using RADIUS.I have ACS version

In first step I configured VPN using local database of users. Got that to work find.
Later, I configured RADIUS server and run
test aaa-server authentication ..... Got successful authentication message on ASA.

Now I am trying to combine the two and have no luck.I did debug on ASA and found that my AAA server is Down. I doubt about the ASA and ACS integration or there is some operability issue. I have checked all my configuration.

Please help.

ASA configuration:

group-policy testacs internal
group-policy testacs attributes
dns-server value x.x.x.x
vpn-tunnel-protocol IPSec webvpn
default-domain value

tunnel-group testacs type remote-access
tunnel-group testacs general-attributes
address-pool testacs-acs-pool
authentication-server-group NEWACS5.1 LOCAL
default-group-policy testacs
tunnel-group testacs ipsec-attributes
pre-shared-key *

aaa-server NEWACS5.1 protocol radius
aaa-server NEWACS5.1 (IT_Server_ZONE) host u.u.u.u

key Rain!@#b0w



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion