Cannot access Network resources- Cisco VPN client

Answered Question
Mar 25th, 2010

Please see attached Network Topology.

I can connect using Cisco VPN client and access all resources from network 192.168.3.0

I cannot ping/ access any hosts on network 192.168.5.0 network.

Any ideas?

Thanks for help in Advance

AD

I have this problem too.
0 votes
Correct Answer by Jennifer Halim about 6 years 10 months ago

Absolutely correct.

Please add the access-list:

access-list ACCS standard permit 192.168.5.0 255.255.255.0

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Jennifer Halim Thu, 03/25/2010 - 19:33

On the 1841 router, you would need to have route for the IP Pool as follows:

ip route 172.16.10.0 255.255.255.0 10.1.1.1

Hope that helps.

agnel Thu, 03/25/2010 - 19:39

Hi:

Thanks for the response. I tried it and it still does not work.

Any other ideas?

Jennifer Halim Thu, 03/25/2010 - 19:41

Do you have split tunnel configured for the VPN Client? If you do, do you have the 192.168.5.0/24 in the split tunnel list?

agnel Thu, 03/25/2010 - 19:49

You know what. I never caught that error. My split tunnel commands shows:

access-list ACCS standard permit 192.168.3.0 255.255.255.0

group-policy XXX internal
group-policy XXX attributes
vpn-idle-timeout 30
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACCS

Do I need to add this line also?

access-list ACCS standard permit 192.168.5.0 255.255.255.0

Thanks again for your quick response.

Correct Answer
Jennifer Halim Thu, 03/25/2010 - 19:52

Absolutely correct.

Please add the access-list:

access-list ACCS standard permit 192.168.5.0 255.255.255.0

agnel Thu, 03/25/2010 - 19:53

Awesome!. Let me try that. Will let you know.

Actions

This Discussion