03-25-2010 06:48 PM
Please see attached Network Topology.
I can connect using Cisco VPN client and access all resources from network 192.168.3.0
I cannot ping/ access any hosts on network 192.168.5.0 network.
Any ideas?
Thanks for help in Advance
AD
Solved! Go to Solution.
03-25-2010 07:52 PM
Absolutely correct.
Please add the access-list:
access-list ACCS standard permit 192.168.5.0 255.255.255.0
03-25-2010 07:33 PM
On the 1841 router, you would need to have route for the IP Pool as follows:
ip route 172.16.10.0 255.255.255.0 10.1.1.1
Hope that helps.
03-25-2010 07:39 PM
Hi:
Thanks for the response. I tried it and it still does not work.
Any other ideas?
03-25-2010 07:41 PM
Do you have split tunnel configured for the VPN Client? If you do, do you have the 192.168.5.0/24 in the split tunnel list?
03-25-2010 07:49 PM
You know what. I never caught that error. My split tunnel commands shows:
access-list ACCS standard permit 192.168.3.0 255.255.255.0
group-policy XXX internal
group-policy XXX attributes
vpn-idle-timeout 30
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACCS
Do I need to add this line also?
access-list ACCS standard permit 192.168.5.0 255.255.255.0
Thanks again for your quick response.
03-25-2010 07:52 PM
Absolutely correct.
Please add the access-list:
access-list ACCS standard permit 192.168.5.0 255.255.255.0
03-25-2010 07:53 PM
Awesome!. Let me try that. Will let you know.
03-25-2010 08:03 PM
That was it. You are awesome!
03-25-2010 08:04 PM
Great to hear it's working now. Thanks for the update.
03-25-2010 08:06 PM
Thanks again. Appreciate your help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: