03-26-2010 03:43 PM - edited 03-06-2019 10:20 AM
Hi
in our org we have 6509 has the core switch but it as not gateway because our gateway to the internet is thru a proxy server. but we have another connection outside if we want to use static routes. But since static routes is for destination, i want a particular server to redirect it the another connection
so need any suggestions on it ..its literally forwarding an ip address or a host to another interface
Karthik
Solved! Go to Solution.
03-26-2010 05:20 PM
Hello Karthik,
You can use PBR to achieve that. Take a look at this link for examples:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml
HTH
Reza
03-26-2010 05:20 PM
Hello Karthik,
You can use PBR to achieve that. Take a look at this link for examples:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml
HTH
Reza
03-28-2010 10:29 PM
Hi
in our org we have 6509 has the core switch but it as not gateway because our gateway to the internet is thru a proxy server. but we have another connection outside if we want to use static routes. But since static routes is for destination, i want a particular server to redirect it the another connection
so need any suggestions on it ..its literally forwarding an ip address or a host to another interface
Karthik
Hi Karthik,
If you want TCP/IP forwarding in server to server check out the below link,
http://support.microsoft.com/kb/323339
HTH
Ganesh.H
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide