Dot1x Authentication

Unanswered Question
Mar 29th, 2010
User Badges:


I have enabled the Dot1x Authentication on a Switch Port in a Cisco 4500 Switch running Cisco IOS Release 12.2(50)SG6.bin.I have configured the Dot1x Configuration.When i give show authentication sessions in fa 6/38 i get the output but without the dynamic ACL for eg Per-User ACL: permit ip any any.

The same i tried on Cisco 6500 Switch running 122-33.SXI3.bin image and get the output with ACL applied.

Is there any image specification which causing this issue.The Per-User ACL: output is missing on Cisco 4500 Switch running 12.2(50)SG6.bin.

Please help me on the same.


Thanks & Regds,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rodrigo Gurriti Thu, 04/01/2010 - 13:08
User Badges:


I cant tell if its a software's release problem but how about the ACS ? is It all configured ?


This Discussion