Hi,
I have enabled the Dot1x Authentication on a Switch Port in a Cisco 4500 Switch running Cisco IOS Release 12.2(50)SG6.bin.I have configured the Dot1x Configuration.When i give show authentication sessions in fa 6/38 i get the output but without the dynamic ACL for eg Per-User ACL: permit ip any any.
The same i tried on Cisco 6500 Switch running 122-33.SXI3.bin image and get the output with ACL applied.
Is there any image specification which causing this issue.The Per-User ACL: output is missing on Cisco 4500 Switch running 12.2(50)SG6.bin.
Please help me on the same.
Thanks & Regds,
Annu