Turbo ACLs

Answered Question
Mar 29th, 2010
User Badges:

Dear All,


I need to implement Turbo ACL on 2811 router.


I tried to enable it by using access-list compiled command but it is not listing the compiled option under access-list command.


I have checked the Cisco docs and IOC command look-up too.


Current IOS in the router is Version 12.4(15)XZ (C2800NM-IPVOICEK9-M).


Kindly help..



Thanks,

Nitin

Correct Answer by cciesec2011 about 7 years 3 months ago

Turbo ACLs was an option, default is on, in Pix version 6.3.x but no longer available in version 7.x and 8.x

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (4 ratings)
Loading.
Giuseppe Larosa Mon, 03/29/2010 - 03:26
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Nitin,

I see the compiled option on following device:


sh ver | inc image
System image file is "flash:c2800nm-adventerprisek9-mz.124-7a.bin"


access-list compiled ?
  reuse  Reuse tables when compiling (for reduced memory requirements)
 


it may be a question of feature set. I don't see the option on a C3825 with SP feature set


sh ver | inc image
System image file is "flash:c3825-spservicesk9-mz.124-24.T.bin"


Hope to help

Giuseppe

nitsg.gupta Mon, 03/29/2010 - 03:39
User Badges:

Thanks Giuseppe,


I think due to voice feature image on the router it is not lisiting the command. i'll make an image upgradation.


I am not able to get the command on PIX/ASA also. Would be appreciated if you please check the same command  availability on PIX/ASA with image release 7.2 or later.



Thanks,


Nitin

Giuseppe Larosa Mon, 03/29/2010 - 05:58
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Nitin,

I'm not an expert of ASA/PIX but I think that turbo ACL is not supported over these firewalls


see config guide for ASA 7.2


http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/traffic.html


I don't see mention of turbo ACL


firewalls need to inspect deeply packets so probably turbo acceleration is not an option


Hope to help

Giuseppe

Correct Answer
cciesec2011 Mon, 03/29/2010 - 09:41
User Badges:

Turbo ACLs was an option, default is on, in Pix version 6.3.x but no longer available in version 7.x and 8.x

Actions

This Discussion