03-29-2010 10:20 AM - edited 03-06-2019 10:22 AM
I wish to disable Telnet and configure ssh on Cisco 6513 switch with the following ios version:
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2 (33)SXI
However the regular ssh configurations (crypto key generate rsa) are not being accepted by the switch.
I'll appreciate some help on this please.
Thanks in advance!
03-29-2010 11:27 AM
There's a bug. You'll need to grab a new version of IOS.
Requires a CCO login.
Cisco will donate $1 to the Red Cross Haiti fund for every rated post!
03-30-2010 02:04 AM
It appears that you do not have a "crypto" IOS. To keep the same feature set you currently have you will need the IP SERVICES SSH IOS to support SSH. After you run the correct IOS you should be able to input the proper SSH commands.
HTH,
Mark
03-30-2010 08:39 AM
You need a K9 image
s72033-ipservicesk9_wan-mz.122-33.SXI.bin
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: