Cisco 2010P Questions

Unanswered Question
Mar 29th, 2010
User Badges:

Hi all,

I have just purchased the Cisco 2010P-G5 Small business switch.


Ø  Does this switch support / work with the Cisco call manager and the Cisco Phones

Ø  Can you automatically backup the config daily.

Many Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Glenn Quesenberry Tue, 03/30/2010 - 07:05
User Badges:
  • Cisco Employee,


     So you've purchased an SFE or SGE Small Business Switch.  To answer your questions in order:

1.  The SFE or SGE series is a Small Business Switch supported by the Small Business Support Center (SBSC) not traditional Cisco TAC.  Communications Manager on the other hand is a TAC supported product, so as you can see the first issue is with two separate support teams.  Also the SFE/SGE switches are not configured or managed with the same tools as traditional Cisco gear and are not IOS or CLI based.  The SFE/SGE switches are not designed to fully integrate with Communications Manager; however you could very well likely get it working (they are 802.3af standards based PoE); but the other broader issues identified above should help you understand that's not a best practice.

2.  As far as automatically backing up the configuration, there's not a built-in feature to do that if that's what you're asking about.  You can run dual images on those switches however.

Hope this helps!



This Discussion