UC540 Voice Translation Rules Help

Answered Question
Mar 30th, 2010

I have a few questions about Tranlsation Rules, and I'd also like to ask for help in writing one/a couple of them...

Basically, I need the following done:

If the number dialed starts with a pound (#), then strip the pound, and put the call through.

If the number dialed does not start with a pound, then prefix it with the number 7, and put the call through

So I suppose my first question would be, what translation rule(s) do I need to accomplish this?

Secondly, will this break CCA access on a UC540

And third, how the heck do I add the translation rules? Is CLI the only option?

Thanks in advance - my apologies for my noobness.

Correct Answer by Marcos Hernandez about 6 years 10 months ago

Hi Andrew,


Here are some good examples that might help:

http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

You can use CLI, but we recommend that you stay within the out of band rules for CCA. There is a document that you can use. Do a search on Cisco.com for "Cisco Configuration Assistant 2.2 Out-of-Band Configuration Guidelines"

Thanks,

Marcos

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Marcos Hernandez Thu, 04/08/2010 - 03:18

Hi Andrew,


Here are some good examples that might help:

http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

You can use CLI, but we recommend that you stay within the out of band rules for CCA. There is a document that you can use. Do a search on Cisco.com for "Cisco Configuration Assistant 2.2 Out-of-Band Configuration Guidelines"

Thanks,

Marcos

amelling1 Thu, 04/08/2010 - 07:53

Hi Marcos

Thanks for your reply - It seems I do not have sufficient access to download the document you linked to. Is there another way I can download it?

Actions

This Discussion