cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
520
Views
0
Helpful
3
Replies

CCM 7.x and VG224 Device Setup

arthurbecker
Level 1
Level 1

When configuring a device on a CCM 7.x and VG224, do you have telnet to to the VG as you wold in a VG248 or it it all done through the admin portion of the CCM via Device > Gateway?

I have built a user and when plugged in, their is dial tone, but noting happens when dialing from that port.

Am I missing something?

3 Replies 3

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

Yes, it's an IOS gateway.

You configure it like you would an ISR - go in and do the SCCP or MGCP config from the box in conjunction with the CCM side stuff.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

The devise is already setup, it is adding users/ports that is the issue.

If you're doing SCCP (keyword in IOS is "stcapp"), you configure the stations as SCCP devices similar to phones.

If you're doing MGCP on the gateway, you configure the ports within the gateway configuration page on a port-by-port basis.

Hailey


Please rate helpful posts!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: