reduce route via export map on VRF

Unanswered Question
Mar 31st, 2010
User Badges:

Hi Guys.

I have one problem.

The scenario is from ISP get full view in VRF OUT on WAN1 , then export route from VRF OUT to VRF CUSTOME1 on AGR1 (WAN1 and AGR1 is cisco 6509). I want export only default gateway from VRF OUT:

ip vrf OUT

rd 333:1

export map TO_EXPORT_DG

route-target export 333:1

route-target import 300:0

ip prefix-list prefix_default_route seq 5 permit

route-map TO_EXPORT_DG permit 5
match ip address prefix-list to_default_gateway
but vrf CUSTOMER1 get full view.
Where  is mistake I don't understand.
if i do "sho ip bgp vpnv4 vrf OUT route-map TO_EXPORT_DG"
I get this:
BGP table version is 328678, local router ID is
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 333:1 (default for vrf OUT)
*          xx.xx.24.1                 0              65000    i
*>                                0              32768    i
Thanks for all.
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Giuseppe Larosa Wed, 03/31/2010 - 13:03
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Timur,

>> *>                                0               32768    i

This means a second exists locally generated on the node (next-hop= and weight 32768) and it is the best path for the highest weight.

what is the configuration in BGP in address-family ipv4 vrf OUT?

Hope to help


TimurKaneev Thu, 04/01/2010 - 00:10
User Badges:


I got it.

I show result of command "sho ip bgp vpnv4 vrf OUT route-map TO_EXPORT_DG"  for show that route-map is working then i want to show routes.

address-family ipv4 vrf OUT

  redistribute connected

  redistribute static

  neighbor x.x.24.1 remote-as 65000

  neighbor x.x.24.1 local-as 65200 no-prepend replace-as

  neighbor x.x.24.1 ebgp-multihop 10

  neighbor x.x.24.1 activate

  neighbor x.x.24.1 distribute-list acl_deny_all out

  neighbor x.x.24.1 route-map set-rt in

  default-information originate

  no synchronization



Giuseppe Larosa Thu, 04/01/2010 - 04:52
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Timur,

>>  network

yes, you are also generating a local default route in this VRF as it is seen in the first post

Hope to help



This Discussion