03-31-2010 02:10 AM
Hi Guys.
I have one problem.
The scenario is from ISP get full view in VRF OUT on WAN1 , then export route from VRF OUT to VRF CUSTOME1 on AGR1 (WAN1 and AGR1 is cisco 6509). I want export only default gateway from VRF OUT:
ip vrf OUT
rd 333:1
export map TO_EXPORT_DG
route-target export 333:1
route-target import 300:0
03-31-2010 01:03 PM
Hello Timur,
>> *> 0.0.0.0 0 32768 i
This means a second 0.0.0.0/0 exists locally generated on the node (next-hop=0.0.0.0 and weight 32768) and it is the best path for the highest weight.
what is the configuration in BGP in address-family ipv4 vrf OUT?
Hope to help
Giuseppe
04-01-2010 12:10 AM
Hello!
I got it.
I show result of command "sho ip bgp vpnv4 vrf OUT route-map TO_EXPORT_DG" for show that route-map is working then i want to show routes.
address-family ipv4 vrf OUT
redistribute connected
redistribute static
neighbor x.x.24.1 remote-as 65000
neighbor x.x.24.1 local-as 65200 no-prepend replace-as
neighbor x.x.24.1 ebgp-multihop 10
neighbor x.x.24.1 activate
neighbor x.x.24.1 distribute-list acl_deny_all out
neighbor x.x.24.1 route-map set-rt in
default-information originate
no synchronization
network 0.0.0.0
exit-address-family
04-01-2010 04:52 AM
Hello Timur,
>> network 0.0.0.0
yes, you are also generating a local default route in this VRF as it is seen in the first post
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: