We are seeing timeouts, commands skipping, error message "command authorization failed' , and running very slow while running netconfig ad-hoc commands on 3750's
It seems that many of the problems occur with the interface range command.
We have aaa running on the 3750's and think that command authorization might be part of the problem, but smaller changes execute without problem.
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 1 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting send stop-record authentication failure
aaa accounting update newinfo
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
Has anyone also encountered this type of issue?