04-01-2010 07:12 AM
Hello, i have this problem with
cisco AP12XX. Some of the AP works fine some not.
I have checked the IOS version on two of them (one working and one not) it is the same version 12.3(7)JA1
Thanks a lot for your help
04-01-2010 09:17 PM
Post the IC_Server.log after performing an inventory collection to the failing AP. What version of RME do you have?
--
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com
04-01-2010 11:51 PM
04-02-2010 12:20 AM
You are seeing a timeout reading the FLASH-MIB. Increase your SNMP timeout in RME to 10 seconds under RME > Devices > Device Management > RME Devices. Edit the attributes for this AP, then do an inline edit, and change the timeout. Be sure to save then apply the changes on the previous window.
--
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com
04-02-2010 12:28 AM
Thanks, i'll try and let you know
04-02-2010 12:38 AM
Great job, it works, but as i have 76 AP which behave the same, do i need to change this timeout value individually or is there any global solution to increase the timeout value.
Thanks
04-02-2010 12:45 AM
Yes, you can increase the global timeout under RME > Admin > System Preferences > RME Device Attributes. However, if the device has already inherited and individual timeout value, the global values will not be used.
--
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com
04-02-2010 12:52 AM
Again thanks a lot for your great help, now that i know what to do
i'll manage to make il works.
This case can be closed
Have a nice easter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: