04-01-2010 09:57 AM - edited 03-21-2019 02:23 AM
Have a UC 520 that in CCA, Configure, Telephony, Voicemail window the option for "Direct Transfer to Voicemail" does not appear.
I'd like to be able to direct after hours callers directly to VM to save them from having to wait through rings.
Thank you in advance for your help. Paul
04-05-2010 08:14 AM
What version of CCA and UC500 Software pack are you running?
Thanks,
Marcos
04-06-2010 07:00 AM
Marcos, the CCA is 2.2.2.
Software is, Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW10.
I suspect that the IOS is the issue and will look to update if if you recommend.
I am attaching the lastest show tech if you need to examine.
Thank you for your response. Paul
04-06-2010 07:03 AM
Yes, you need to upgrade your IOS and CUE, actually the entire feature pack to the latest. We are about to release a new one that corrects voicemail clippings, so you may want to wait a little bit.
Thanks,
Marcos
04-06-2010 07:04 AM
XW10 is too old!!!
CCA 2.2.2 on 8-0-1 and 8-0-2 looks like this...
04-06-2010 07:12 AM
Steve, yes I know that there was the field to have a forwarding digit selection. That is why I suspected that the IOS was WAY outdated.
I will upgrade and go from there.
Marcos, do you have a date of the next release?
Thank you both for your input. Paul
04-06-2010 07:14 AM
Not yet Paul, but it should be available shortly.
04-06-2010 07:15 AM
8-0-2 just came out.
But there was a problem with the version of CUE in that bundle 7.1.3 that sometimes had audio delays for voice mail, and so a 7.1.6 CUE is coming.
But if I were you, I would go to 8-0-2 first.
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide