Cisco 1100

Unanswered Question

I have a Cisco Aironet 1100 that is giving me fits.  I have an ip addrees and setup wireless security on the unit.  I can ping the ip address, I can even see the wireless network.  Sometimes I can even get a dhcp assigned address, but I cannot browse the network or internet.  I can ping the access point, but only temporarily.  Here is my existing config:


!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Cisco20
!
no logging console
enable secret 5 $1$x38H$CaoPEB4VI.cMXx8h/uxvC0
!
ip subnet-zero
ip domain name pce
ip name-server 192.168.115.6
!
!
no aaa new-model
!
dot11 ssid PCE Net
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 1209061251390307213865
!
!
!
username Cisco password 7 14341B180F0B
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid PCE Net
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
hold-queue 80 in
!
interface BVI1
ip address 192.168.115.20 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.115.254
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
control-plane
!
bridge 1 route ip
!
!
banner motd 
This is a secure network.  Only autherized users are allowed.
!
line con 0
line vty 0 4
login local
line vty 5 15
login
!
end

Since I'm only testing the units and they are not in a live environment, I don't mind messing them up.  Thanks for any help that you can provide.

Will

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kayle Miller Thu, 04/01/2010 - 12:38

Will,

     Everything looks right nothing is glaring to me unless it's a duplicate IP address, other than I have seen really wierd issues when the encryption is set to encryption mode ciphers aes-ccm when using WPA/WPA v1

Actions

This Discussion