04-02-2010 06:09 AM - edited 03-06-2019 10:26 AM
Hello
I have a multicast problem and as I understand it I have multicast setup correctly. Basically I have a multicast server, a VLC server udp multicasting a mp3 file, but the traffic can’t escape the local vlan even though ip pim sparse mode is setup. The rendezvous point is on the vlan that one of the receivers is on.
I’m lost as to why the traffic can’t escape its own vlan. Attached is a picture of the layout.
Any help is greatly appreciated.
e-
Solved! Go to Solution.
04-02-2010 06:15 AM
Eric
Check that multicast ttl is set to > 1 as it needs to be to go across vlans. You set this within VLC GUI.
Jon
04-02-2010 06:15 AM
Eric
Check that multicast ttl is set to > 1 as it needs to be to go across vlans. You set this within VLC GUI.
Jon
04-02-2010 07:13 AM
That was it, thanks Jon.
e-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide