04-05-2010 06:29 AM - edited 03-04-2019 08:01 AM
Does anyone know if the T1 DSU/CSU card is compatible with a VWIC-2MFT-T1? We are going to use it as a data t1.
Solved! Go to Solution.
04-05-2010 12:44 PM
Yes. I've tested this in my lab but with a homemade t1 xover.
Are these devices going to be at the same location? I'm just curiuos as to what excatly your doing, that's all - don't mean to poke..
04-05-2010 11:37 AM
Please state the exact part number and on which router model you intend to use it.
04-05-2010 12:19 PM
The new card is a WIC-1DSU-T1-V2. The WIC-1DSU-T1-V2 will be in an 1841 and the VWIC-2MFT-T1 is already in a 2821. Can these two cards interface with each other? Standard RJ48 T1 cable?
04-05-2010 12:44 PM
Yes. I've tested this in my lab but with a homemade t1 xover.
Are these devices going to be at the same location? I'm just curiuos as to what excatly your doing, that's all - don't mean to poke..
04-05-2010 12:50 PM
data point to point t1 in seperate physcial locations.....slow i know.
04-05-2010 12:58 PM
That all depends on the bandwidth and the amount of traffic going across. If you need help or configs to set this up let me know.
Good Luck..
04-05-2010 01:09 PM
I have a few other P2P T1s configured but just not with this particular card. thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide