One of our customers needs us to busy out there PRI's while they install voice firewalls. There running CUCM 4.1 and the gateways are all MGCP. I found the document below and I have a couple questions about the gateway reboot in step 6. Can I do this reboot ahead of time to get ready and is it safe to leave the settings after they do there install or should I change it back?
I don't think you need to reboot the physical gateway. You simply need to enable status polling on the MGCP endpoint (in CUCM configuration mode) and do a reset on the gateway from CUCM. No reboot should be necessary.
I don't think you need to reboot the physical gateway. You simply need to enable status polling on the MGCP endpoint (in CUCM configuration mode) and do a reset on the gateway from CUCM. No reboot should be necessary.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
