Does anyone have experience doing the following RSPAN configuration:
monitor session 1 source remote vlan 992
monitor session 1 destination interface Gi2/10
monitor session 2 source vlan 991
monitor session 2 destination remote vlan 992
Will the above configuration work?
The reason for the above is we have a collapsed core topology (both Catalyst 4503) and there is a requirement to span vlan 991 to one port at one of the switches. We don't have any access switch.
So I can't use a local span because vlan 991 existed in both core switches.
But if i use remote-span I have the above 'curious' situation. I would appreciate any input as to how best to fulfill the requirement.