cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
691
Views
0
Helpful
3
Replies

Change Speed and duplex on Ipphone

boubourse92
Level 1
Level 1

Hello,

We have IPphone in a branch and we want change speed and duplex in remote.

Maybe you know how to change this option of speed and duplex with CCMadmin with BAT ?

Thanks in advance

regards

Tom

1 Accepted Solution

Accepted Solutions

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

It's not possible to do this with BAT; it's a property you would need to configure on each handset.

There is a tool available that can allow you to do this remotely, but still manually:

https://supportforums.cisco.com/message/1164373#1164373

There are a number of similar posts on the forum already; in general I would not recommend that you do this as you can guarantee that administrative inconsistencies between the PCs, phones, and switch ports on the customer's site will create more problems that it solves.

https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=speedduplexphone

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

3 Replies 3

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

It's not possible to do this with BAT; it's a property you would need to configure on each handset.

There is a tool available that can allow you to do this remotely, but still manually:

https://supportforums.cisco.com/message/1164373#1164373

There are a number of similar posts on the forum already; in general I would not recommend that you do this as you can guarantee that administrative inconsistencies between the PCs, phones, and switch ports on the customer's site will create more problems that it solves.

https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=speedduplexphone

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Thanks , now it's sure we can't do it .

One by one .. a really long work !

Hi

Yes. It will take some time to do, and leave you with a never ending admin task of continually checking the settings of each phone/PC NIC/switchport every time someone's PC slows down slightly...

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: