I have Cisco Router 1841. Recently We got 10 MBPS leased Line from ISP. and also get following Ip Address :
WAN IP : 184.108.40.206 255.255.255.252
LAN IP : 220.127.116.11/27
I have to configuer many to one translation ie Internal network 192.168.2.0/24 and public IP 18.104.22.168/27 . All internal hosts will be translated to public address ie Overloading or port address translation PAT.
All bove address are not actual Ip address. these are dummy.
Internal IP address is : 192.168.1.0/24
I configured Cisco Router 1841 with above IP. But while configuring NAT it gives problem .I think that there is problem while configuring NAT.
ip address 192.168.2.196 255.255.255.0
ip nat inside
ip address 22.214.171.124 255.255.255.224 secondary
ip address 126.96.36.199 255.255.255.252
ip nat outside
ip nat pool ABC 188.8.131.52 184.108.40.206 prefix-length 27
ip nat inside source list 1 pool ABC overload
access-list 1 permit 192.168.2.0 0.0.0.255
Can any body guide help me to solve this NAT problem