04-07-2010 03:45 AM
Dear All,
I would like to ask you about some command that enable snmp on ASA 5505.
snmp-server community public
snmp-server enable traps
snmp-server host inside 192.168.0.1
snmp-server host outside 203.10.10.1
my question is:
snmp-server host outside 203.10.10.1 so, i want to change ip to hostname but it not allow.
So how can i change to hostname bece i don't want to set public ip add.
Best Regards
rechard
04-07-2010 04:30 AM
You have to configure the hostname using the "name" command prior to using the hostname in the snmp command.
Example:
name 203.10.10.1 snmp-outside
snmp-server host outside snmp-outside
Please rate and mark all answered questions. Thanks
04-07-2010 06:43 PM
Dear halijenn,
Thanks you for your command!!!
So my HQ they use DHCP(Public ip address) that why i would like to set domian name to point to my HQ.
Example: snmp-server host outside abc.net
then it don't care about the public ip address i just to care about domain name only.
is it possible ?
Best Regards,
Rechard
04-07-2010 06:45 PM
Unfortunately that is not supported.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: