I have CCM 7.0.2 currently and am working on getting calls to display properly in the missed calls section of the IP Phones. I have an integration through a H.323 gateway to an Avaya PBX using PRIs. The Avaya and the Cisco CM are setup to dial 4 digits between them. I setup a calling party transformation so that the Cisco phones will only see 4 digits coming from the Avaya phones. That worked like it was supposed to. The problem that I am seeing is that the active call will display the correct 4 digit caller id, however if you look in your missed calls, it is showing the full 10 digit number and not just the 4 digits. I'm curious if anyone has had any luck getting this to work and what I might be missing.