Solved: telnet or SSH for AP 1142

karthikeyan gopinathan · ‎04-07-2010

Hi

I am trying to connect to a remote Access point within our network..is that possible to enable telnet or ssh in the access point through WCS or https. please let me know

Karthik

sschmidt · ‎04-07-2010

From WCS you could push an AP template. On the "AP Parameters" tab you can enable ssh and telnet access then apply it to the AP.

http://www.cisco.com/en/US/partner/docs/wireless/wcs/6.0/configuration/guide/6_0temp.html#wp1064409

View solution in original post

sschmidt · ‎04-07-2010

From WCS you could push an AP template. On the "AP Parameters" tab you can enable ssh and telnet access then apply it to the AP.

http://www.cisco.com/en/US/partner/docs/wireless/wcs/6.0/configuration/guide/6_0temp.html#wp1064409

karthikeyan gopinathan · ‎04-07-2010

thanks a lot that was working fine..but i was not able to got the link you gave me , yet your advice was working

sschmidt · ‎04-07-2010

Sorry about that I gave you the internal link:

http://www.cisco.com/en/US/customer/docs/wireless/wcs/6.0/configuration/guide/6_0temp.html