I want to allow my internal Web Server (CCTV) on private IP(192.168.1.2) to be accessed from the internet. I have already configured NAT for PCs on private IPs to access Internet.
Now the problem im facing is "I cannot access my Local Lan Web Server PC" from Internet. Kindly look at the configuration below & let me know where Im doing mistake. Also kindly check the 'routes' that I have given, as I've seen some sample configs but they are without 'routes'.
Also can u pls tell me if I need a 'route-map' to direct traffic from Internet to local Web-Server.
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip address 192.168.100.10 255.255.255.0 (for reference,,although its Public IP in actual)
ip nat outside
ip nat inside source list 10 interface FastEthernet1/0 overload
ip nat inside source static 192.168.1.2 192.168.100.11
ip route 0.0.0.0 0.0.0.0 192.168.100.1 (Gateway Modem)
access-list 10 permit 192.168.1.0 0.0.0.255
access-list 101 permit ip any 192.168.100.11 0.0.0.255
Router_7200#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 192.168.100.11:80 192.168.1.2:80 --- ---
Please note I cannot see any output in Debug IP NAT,
Regards & Thanks in advance!!