Current taken by cisco 7609 and cisco 3725 routers

Unanswered Question
Apr 8th, 2010

Dear Sir,

normally cisco 7609 and cisco 3725 will take how much current.

show power output of cisco 7609 is

system power redundancy mode = redundant
system power total =     3795.12 Watts (90.36 Amps @ 42V)
system power used =      1713.18 Watts (40.79 Amps @ 42V)
system power available = 2081.94 Watts (49.57 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    WS-CAC-4000W-INT   3795.12 90.36  OK     OK     on
2    WS-CAC-4000W-INT   3795.12 90.36  OK     OK     on
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    FAN-MOD-09          241.50  5.75  OK
2    FAN-MOD-09          241.50  5.75  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    WS-X6182-2PA         99.96  2.38    99.96  2.38  on    on
2    WS-X6182-2PA         99.96  2.38    99.96  2.38  on    on
3    WS-X6182-2PA         99.96  2.38    99.96  2.38  on    on
5    WS-SUP720-BASE      315.00  7.50   315.00  7.50  on    on
6    WS-SUP720-BASE      315.00  7.50   315.00  7.50  on    on
7    WS-X6182-2PA         99.96  2.38    99.96  2.38  on    on
8    WS-X6148-RJ-45      100.38  2.39   100.38  2.39  on    on
9    WS-X6182-2PA         99.96  2.38    99.96  2.38  on    on
Thanks and Regards,

Senthil

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion