WS-X6548-GE-TX Firmware Upgrade

Unanswered Question
Apr 8th, 2010
User Badges:

I have a client has a WS-X6548-GE-TX blade with some bad ports.  I am replacing the blade but notice a difference in the FW, SW & HW versions from the sh mod output.  The client is concerned that a versions may create a problem.  I have searched and found 1 procedure to upgrade the firmware if the version is between 4.0 & 9.0 


Here is the show mod of the blade getting removed:


NY17RS001#show mod

Mod Ports Card Type                                             Model                     Serial No.

--- ----- --------------------------------------                           ------------------            -----------

  5    2  Supervisor Engine 720 (Active)                   WS-SUP720-3B       SADXXXXXXXX

  9   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SALXXXXXXXX

Mod MAC addresses                           Hw       Fw           Sw                 Status

--- ---------------------------------- ------           ------------ ------------   -------               ---------

  5  000e.84e5.f838 to 000e.84e5.f83b   4.1       8.1(3)       12.2(18)SXD3   Ok


  9  001d.45bb.f260 to 001d.45bb.f28f  11.3       7.2(1)       8.3(0.156)RO    Ok

Mod Sub-Module                      Model                      Serial                Hw     Status

--- ---------------------------               ------------------             ------------            -------   -------

  5 Policy Feature Card 3          WS-F6K-PFC3B       SADXXXXXXXX   1.1      Ok

  5 MSFC3 Daughterboard         WS-SUP720            SADXXXXXXXX   2.2      Ok

 

Mod Online Diag Status

--- -------------------

9 Pass


Here is the show mod of the blade getting installed:


Router#sh mod
Mod Ports Card Type                                              Model                     Serial No.
--- ----- --------------------------------------                            ------------------             -----------
  5    2  Supervisor Engine 720 (Active)                     WS-SUP720-3B       SADXXXXXXXX
  9   48  SFM-capable 48 port 10/100/1000mb RJ45  WS-X6548-GE-TX     SADXXXXXXXX


Mod MAC addresses                             Hw         Fw           Sw                  Status
--- ---------------------------------- ------              ------------ -------------  ------                  ---------
  5  0011.92e7.5cc4 to 0011.92e7.5cc7   4.1        7.7(1)        12.2(18)SXD7   Ok
  9  0003.feae.5d3c to 0003.feae.5d6b     7.0        7.2(1)        8.3(0.156)RO    Ok

Mod Sub-Module                      Model              Serial                Hw     Status
--- ---------------------------              ------------------ -    -----------            -------    -------
  5 Policy Feature Card 3       WS-F6K-PFC3B  SADXXXXXXXX   1.1      Ok
  5 MSFC3 Daughterboard         WS-SUP720    SADXXXXXXXX   2.2      Ok

Mod Online Diag Status
--- -------------------
  5 Pass
  9 Pass
Router#




Thanks in advance.


Mikec5000

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion