Hi All,
I need some clarification about the snmp v3 configuration.
The below configuration is correct / i can proceed this.
access-list 99 permit 1.1.1.1!!LMS Server!!
access-list 99 permit 2.2.2.2!! CSMARS Server!!
!
snmp-server group test v3 auth access 99
!
Note: Below commands will not see in the running config; whether i have to apply the same commands for csmars also?!!
snmp-server user test test123 remote 1.1.1.1v3 auth md5 test234
snmp-server user test test123 v3 auth md5 test234 priv des test234
snmp-server host 1.1.1.1 test !! Points to LMS Server!!This same commands have to points to csmars?
!
If somebody have best practise Snmp trap configuration send it ..