Displaying numbers pressed on screen

Answered Question
Apr 8th, 2010
User Badges:

After a call is connected if you press any of the number keys the numbers do not display.  Is there a setting in call manager to turn this on?  I have gone through the admin and system guide and have not found a reference to this.


Thanks in advance.

Correct Answer by Aaron Harrison about 7 years 2 months ago

Hi


I had this request once; there was no way to do it then, and I'm not aware of anything changing since...


You see the dialed/connected number, not the DTMF you send afterwards...


Aaron

Correct Answer by Jaime Valencia about 7 years 2 months ago

Unfortunately that's not something you can configure. Once the call is connected the DTMFs are sent but they won't show up in the LCD screen after the DN you dialed.

If you feel this should be a feature, get in touch with your AM and ask him about submitting a PER on this.


HTH


java


If this helps, please rate


www.cisco.com/go/pdihelpdesk

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jaime Valencia Thu, 04/08/2010 - 15:28
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Unfortunately that's not something you can configure. Once the call is connected the DTMFs are sent but they won't show up in the LCD screen after the DN you dialed.

If you feel this should be a feature, get in touch with your AM and ask him about submitting a PER on this.


HTH


java


If this helps, please rate


www.cisco.com/go/pdihelpdesk

Correct Answer
Aaron Harrison Fri, 04/09/2010 - 00:13
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

Hi


I had this request once; there was no way to do it then, and I'm not aware of anything changing since...


You see the dialed/connected number, not the DTMF you send afterwards...


Aaron

Actions

This Discussion