Fibre connection query re SRW2048 switch

Unanswered Question
Apr 8th, 2010
User Badges:

Hi, probably a basic question but hoping someone can assist. I have a client with this on site and it has 3x GB connections.  We have connected ST-SC copper fibre converter cables to this however on the other end the fibre switch is only 10/100 and there are no lights on the 2048 GB ports and the cables are not working. I'm wanting to know if its going from GB  to 10/100 that would be the problem?  Thanks for any help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Reza Sharifi Thu, 04/08/2010 - 17:56
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Hi Mike,


Yes, that is the problem.  The fiber interface is Gig only and does not work with 10/100.  With Fiber both sides have to use the same speed.


HTH

Reza

Actions

This Discussion