cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1737
Views
0
Helpful
4
Replies

VPN in Tranparent mode

sushil
Level 1
Level 1

Hi,

Is it possible to run remote IPSEC and SSL VPN (clientless or anycoonet client) while ASA in Transparent mode?All NAT/PAT is on Router before the ASA.

If yes,Any config example would be appriciated.

reg,

Sushil

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

No, VPN whether it is IPSEC or SSL are not supported when ASA is in transparent mode.

Here is the URL for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/fwmode.html#wp1222826

View solution in original post

4 Replies 4

Jennifer Halim
Cisco Employee
Cisco Employee

No, VPN whether it is IPSEC or SSL are not supported when ASA is in transparent mode.

Here is the URL for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/fwmode.html#wp1222826

Thanks Halijenn for clearing the doubt.I had same view but had some confusion.Thanks a ton.

You can run IPsec or SSL VPN through the ASA while in transparent mode.

The limitation is that the ASA itself will not terminate any tunnel with the exception of one VPN for admin purposes.

Federico.

Interesting!!!!

How to achieve that.

Nat/Pat is on router.

How to terminate the connection on router and run vpn through ASA.

Reg,

Sushil

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: