cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
750
Views
0
Helpful
3
Replies

HUNT GROUP FINAL NUMBER

Naisamuddin pk
Level 1
Level 1

Hi teams,

I have a hunt group with two extension.Using this hunt group i handled the call successfully.Now i created new voice mail box with no 850.Now i wanted to divert the call to this voice mail if any can not picking the phone.

My voice mail pilot number is 893.Please help to solve this problem with all relevent information becuase i am new in this field.

ephone-dn  106  dual-line
number 099 secondary 401
label 099
description RECEPTION1
name RECEPTION1
call-forward busy 893
call-forward noan 893 timeout 10
corlist incoming use900-international
!
!
ephone-dn  107  dual-line
number 098 secondary 401 no-reg
label 098
description RECEPTION2
name RECEPTION2
call-forward busy 893
call-forward noan 893 timeout 10
corlist incoming use900-international

ephone-hunt 1 longest-idle
  pilot 9
list 098, 099
final 850
timeout 30, 30

Plese help me

thanks

3 Replies 3

David Trad
VIP Alumni
VIP Alumni

Hi naisamuddin,

Can you please confirm that the VM you created for the hunt-group "850" is a Group Delivery Mail Box (GDM)?


Please also check if the following information is in the running configuration:

voice translation-rule 2002
rule 1 /^6/ //

voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002


dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 893
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1 
dtmf-relay sip-notify
codec g711ulaw
no vad


ephone-dn  86
number 6... no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 893


The above is only an example, however for your Hunt Group VM:

ephone-hunt 1 longest-idle
pilot 9
list 098, 099
final 6850

timeout 30, 30

The above is what I would think you would want to do, this way it goes to the particular Voice Mail, you will also need to make VMB 850 a GDM otherwise it wont work, well not that I can see anyway.

I hope the above makes sense to you.

Did you use CCA 2.2.2 to configure the system?

Cheers,

David.

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *

Dear David,

Thanks for your leping mind.

I am attaching the running configuration.according to this can you give me

command line guidence because initiater in Voip.

naisamuddin,

>

A new message was posted in the thread "HUNT GROUP FINAL NUMBER":

>

https://www.myciscocommunity.com/message/43285#43285

>

Author : David Trad

Profile : https://www.myciscocommunity.com/people/wicomoz@hotmail.com

>

Message:

bchris999
Level 1
Level 1

The timeout on the huntgroup has to be shorter than the call-forward noan timeout on the extensions. I ran into the same problem (I assume it gets disconnected instead of going to voicemail), and logged a TAC case for it, however they would not accept this was a bug.... their workaround was using a 3rd extension as an overlay extension instead of a huntgroup, but I dont think this is an acceptable workaround. I am still trying to find a good solution. If anyone else knows, please post here?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: