cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
504
Views
0
Helpful
2
Replies

Please Help...Serial Interface connection

balbaletabrez
Level 1
Level 1

Hi,

I have 2 x cisco routers (2600 and 3600), i am connecting Serial Interface of both routers to each other, encap is HDLC,

but the interfaces are not coming UP, getting the error when "show ip int serial 1/0" on both routers.

Please help to resolve this.....

R1C2600R#show int ser 1/0
Serial1/0 is down, line protocol is down
  Hardware is CD2430 in sync mode
  Internet address is 10.10.10.10/16
  MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec, rely 255/255, load 1/255
  Encapsulation HDLC, loopback not set, keepalive set (10 sec)
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/0/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 87 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=down  DSR=down  DTR=down  RTS=down  CTS=down

R1C2600R#show ru int ser 1/0
Building configuration...

Current configuration:
!
interface Serial1/0
bandwidth 256
ip address 10.10.10.10 255.255.0.0
no ip directed-broadcast
clockrate 56000
end

***********************************************************************************************

C3640R#show int ser 1/0
Serial1/0 is down, line protocol is down
  Hardware is CD2430 in sync mode
  Internet address is 10.10.10.20/16
  MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec, rely 255/255, load 1/255
  Encapsulation HDLC, loopback not set, keepalive set (10 sec)
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/0/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 85 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=down  DSR=down  DTR=down  RTS=down  CTS=down

C3640R#show ru int serial 1/0
Building configuration...

Current configuration:
!
interface Serial1/0
bandwidth 256
ip address 10.10.10.20 255.255.0.0
no ip directed-broadcast
clockrate 56000
end

Thanks

Tabrez

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

Are you a student working on lab exercise ?

Yes kind of...

Eureka .....Its working now

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card