CUCME - Questions

saquib.tandel · ‎04-09-2010

Hi

How do I get these details on CME router

to check if SIP trunk with Nortel is established
How many calls where successfully made during last one hour and duration for each call??
How much bandwidth does each call takes??
what steps are needed to differentiate the local calls with PSTN calls ( change ringtone ) ; endpoints are sip phones.

thanks

Saquib

paolo bevilacqua · ‎04-10-2010

- check if it works

- enable CDR logging

- 82 kbps each

- not possible. With sccp phones, is possible.

alig.norbert · ‎04-10-2010

Hi,

to check if SIP trunk with Nortel is established
- show sip-ua register status
How many calls where successfully made during last one hour and duration for each call??
- the real-time calls can be shown with show sip-ua calls
How much bandwidth does each call takes??
- with how sip-ua calls you see the codec/bandwidth as well
what steps are needed to differentiate the local calls with PSTN calls ( change ringtone ) ; endpoints are sip phones.

Greets,

Norbert

paolo bevilacqua · ‎04-10-2010

show sip-ua register status

Incorrect, normally SIP trunks between PBXs do not use registration.