04-10-2010 12:56 AM - edited 03-15-2019 10:11 PM
Hi all,
One of our customer requested for an upgradation, from Exsting 30 channels to 150 channels.Current configuration is attached.Kindly help to configure the same.
Customer requirement.
[1], Additionl PVDM modules on the routers to support more VOIP channel.
[2], Additional 4 E1 ports for voice trunks between router and customer PBX.
[3], Soft upgrade the Internet Access link(LL=10M, port=2M) to Internet Access link(LL=10M, port=2M).
[4], Need to add 120 channel on IP Trunking gateway.
Current configuration and Diagram attached.
Thanks in advance.
Lijesh
04-10-2010 06:40 AM
And your question is ?
Please do not solicit for urgent help on a freely contributed user forum.
If you need pre-sale and configuration support, engage a reputable consultant or certified cisco partner.
04-10-2010 06:51 PM
Hi bevilacqua,
I understand the importance of the forum, that was a immediate requirement and i don’t have much knowledge about Voice related things.
Would be helpful if you can give some inputs on this.
Thanks in advance.
Lijesh
04-11-2010 04:13 AM
Since you have no experience, I recommend you engage a reputable professional or certified partner.
Otherwise, it will be impossible for you to satisfy your customer requests.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: