cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
548
Views
0
Helpful
4
Replies

Dial-Peer

tomfree_leo
Level 1
Level 1

Hi

I got couple of dial-peer in my configuration, donno which is used for incomming and outgoing.

During an active call is it possible to get the dial-peer information.

Sip phone vendor wants to enable rtp encryption on CME, any help on it

cheers

TOM

1 Accepted Solution

Accepted Solutions

dial-peer voice 11 voip is your incoming dial-peer and the rest are outgoing..

Hope this helps....

Please rate all useful posts

View solution in original post

4 Replies 4

Ayodeji Okanlawon
VIP Alumni
VIP Alumni

Can you post your dial-peer  config here...

Please rate all useful posts

Hi,

Here it is....

dial-peer voice 11 voip
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
incoming called-number .%
dtmf-relay rtp-nte
no vad

dial-peer voice 12 voip
   destination-pattern 9……….
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
no vad

dial-peer voice 13 voip
   destination-pattern 9011T
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
no vad


dial-peer voice 104 voip
destination-pattern 9[6]......
voice-class codec 1
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notifydial-peer voice 100 voip
description dial peer digital toward CUE
no voice-class sip g729 annexb-all
session protocol sipv2
incoming called-number ....
dtmf-relay sip-notify
codec g711ulaw
!
dial-peer voice 101 voip
description dial peer digital toward CUE
destination-pattern 9[11]......
voice-class codec 1
no voice-class sip g729 annexb-all
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notify
!
dial-peer voice 102 voip
destination-pattern 10..
voice-class codec 1
no voice-class sip g729 annexb-all
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notify
!        
dial-peer voice 133 voip
destination-pattern 9[00]..........
voice-class codec 1
session protocol sipv2
session target ipv4:192.168.1.100
incoming called-number ....
dtmf-relay sip-notify
!
dial-peer voice 135 voip
description dial peer digital toward CUE
destination-pattern 95..........
no voice-class sip g729 annexb-all
session protocol sipv2
session target ipv4:192.168.1.100
dtmf-relay sip-notify
codec g711ulaw
!

dial-peer voice 11 voip is your incoming dial-peer and the rest are outgoing..

Hope this helps....

Please rate all useful posts

paolo bevilacqua
Hall of Fame
Hall of Fame

Sip phone vendor wants to enable rtp encryption on CME, any help on  it

Impossible with third-party phones.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: