04-12-2010 05:57 PM - edited 03-06-2019 10:35 AM
Hello:
I have a Stack of Catalyst 3750, since one week ago, the log of the Switch show me some errors in VTP, and the stack doesn´t receive Vlan from others Switch, the log error message are:
*Mar 1 05:04:46.059 GMT: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal
revision summary on trunk: St3 (CC3750_1erTercioMO-3)
(CC3750_1erTercioMO-3)
*Mar 1 05:04:46.075 GMT: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal
revision summary on trunk: St1 (CC3750_1erTercioMO-1)
(CC3750_1erTercioMO-1)
*Mar 1 05:04:46.067 GMT: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (CC3750_1erTercioMO-3)
*Mar 1 05:04:46.075 GMT: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to ANTAMINA. (CC3750_1erTercioMO-1)
*Mar 1 05:04:57.273 GMT: %SW_VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 4 from vtp function vtp_configure_domain: N
o such domain
-Traceback= E88DBC E89508 16BA14 16D02C E06C84 E05DA8 E14614 E1558C E14B08 E19F90 E3FD1C A73D88 A6A858
CC3750_1erTercioMO#sh vtp status
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : ANTAMINA
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Enabled
MD5 digest : 0xF6 0x1A 0x16 0x1F 0x68 0x06 0x41 0xDC
*** MD5 digest checksum mismatch on trunk: St1 ***
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
CC3750_1erTercioMO#
Please, some ideas about what happend, help me in this matter.
Regards.
Fernando.
04-12-2010 06:02 PM
You have "tracebacks" so what IOS are you running?
04-12-2010 06:05 PM
Besides the traceback, it looks like the VTP domain name and password were changed.
http://www.ciscosystems.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml
Victor
04-13-2010 07:42 AM
hi Fernando
this is recomendation for cisco
look this link: http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080890613.shtml#topic18
Error Message
%SW_VLAN-4-VTP_INTERNAL_ERROR : VLAN manager received an internal error [dec] from vtp function [chars]: [chars]
Explanation An unexpected error code was received by the VLAN Manager from the VTP configuration software.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create/http://tools.cisco.com/ServiceRequestTool/create/, or contact your Cisco technical support representative and provide the representative with the gathered information.
Error Message
%SW_VLAN-4-VTP_USER_NOTIFICATION : VTP protocol user notification: [chars]
Explanation VTP protocol code encountered an unusual diagnostic situation which the user should be made aware of.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at
http://tools.cisco.com/ServiceRequestTool/create/http://tools.cisco.com/ServiceRequestTool/create/, or contact your Cisco technical support representative and provide the representative with the gathered information.
04-13-2010 08:16 AM
"Explanation An unexpected error code was received by the VLAN Manager from the VTP configuration software."
"Explanation VTP protocol code encountered an unusual diagnostic situation which the user should be made aware of."
Is this supposed to be helpful? lol
04-13-2010 08:22 AM
Hello Fernando,
>> *Mar 1 05:04:46.059 GMT: %SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: MD5 digest checksum mismatch on receipt of equal
means the password are different on the two sides of the trunk link fix this and you should solve
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: