04-13-2010 02:35 PM - edited 03-11-2019 10:32 AM
Have an ASA 5520 and downloaded 8.3.1.1 Interun release today. When ever I try to
load the image to flash, either using ASDM or tftp, the ASA will reboot
before done writing image to flash. Can download it to ASA just fine, then starts writing to flash, gets to about
3 megs written and the ASA will just reboot. Even did it through the console, no error, just says 'rebooting'. Anyone ever seen this? I have plenty of space on flash, so that is not the issue.
Thx
04-13-2010 07:17 PM
Were you upgrading from 8.3.1 to interim 8.3.1.1? or from the previous version of ASA?
To run version 8.3.1, you would need memory upgrade on your ASA 5520, have you also performed the memory upgrade?
Check out this release notes for memory requirement:
http://www.cisco.com/en/US/docs/security/asa/asa83/release/notes/asarn83.html
Also, any specific reason why you upgrade it to an interim release?
04-14-2010 05:33 AM
I have 2Gig ram in ASA and am running 8.3.1 with no issues. Just testing 8.3.1.1 in the lab. It does the reboot when writing image to flash. So copies to memory OK, just gets to about 3 meg writtin to flash and just reboots. Never seem this before.
04-14-2010 05:53 AM
Seems like version 8.3.1(1) has some issue. There is an internal bug, and no workaround at this stage. I would wait for the next interim 8.3.1(2)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide