RME Detailed Device interface Last Changed date reporting

john.caterino · ‎04-14-2010

How do I create a custom template rule to get ports that have changed since a particular date?

LMS 3.1 RME 4.2

when creating a custom template rule for "interfaces" "Last Changed", the date format in the rule is different than

the field in detailed device reports. I thought the field " last changed " was the point along the sysuptime timeline

but the sysuptime is less than the number of days in "LastChanged".

any help appreciated..

Michel Hegeraat · ‎04-15-2010

There is no relation between the sysuptime of a device and the lastchange of any of it's interfaces

Cheers,

Michel

john.caterino · ‎04-15-2010

That explains why the last change numbers are sometimes higher than the sysuptime. Thank You!!!!

is there a particular way to select the "Value" in RME-Custom Template Reports-Custom Template-rules when choosing

Inventory group= interface , Attribute = Last Changed (yy:mm:dd:hh) ?

The format requires years,months,days and hours while the value of the field is xxxx days, hh:mm:ss

I seem to be unable to get the correct results...

Michel Hegeraat · ‎04-16-2010

I have never tried that. I always used a selection from the default change report.

Date value are always a pain when queries need to be done. Format probably is US style.

Cheers,

Michel